Program I cant figure out

[dcpaters]

A voltage source supplies a load through a resistor. The
voltage source has a rating of 1000 volts and a power rating
of 10000 watts. The resistor is 5 ohms with a power ratings
of 118.975 watts. The resistance of the load may vary
randomly between 200 and 600 ohms. Using 100000 samples
calculate the following:

1-number of times the power rating of the resistor is exceeded
2-average power delivered by source
3-maximum power delivered by source
4-minimum power delivered by source

The output of the program should consist of 4 numbers,
each number being output on a separate line in the order
listed above. The numbers should be output with a precision
of 2.