Can Signal

[Lex33]

I have also another problem with a task,perhaps somebody can tell me how I should paint it in 1)?
1. Sketch a CAN message at a speed in a voltage-time diagram
of 500 kbps (high-speed) and the data bytes 0xBF, 0xAA (ID = 0xB5,
Standard frame). The voltages to be applied are UCAN-H-M acse, UCAN-L-M acse
and UCAN-H - UCAN-L. Use the prepared diagram (see Appendix
A). The CRC checksum is: 1010 1110 0100 0011.
2. A second SG wants to access the bus at the same time and transmit the following message:
ID = 0xA8, data bytes 0xB0, 0xFF. Which of the two news wins the
Arbitration process with simultaneous bus access?

How does the Can Message look like ?

I have no Idea how I should paint it?

[Lex33]

Can somebody post a sketch ,how it looks like .

I have really problems with this task

[tpb]

I don't understand your question.

I assume (through google) that "CAN" stands for "Controller Area Network". https://en.wikipedia.org/wiki/CAN_bus

What do you mean by "paint" in the phrase "how I should paint it"?

[jonnin]

I agree he is talking about canbus, a type of signal (analog, I think?) that is common on some types of engines and similar hardware. ?? I used it very briefly long ago, but can't recall much beyond it being difficult to work with.

I have no idea what he is saying though.

[Lex33]

signal for 0xAA I have already painted and 0xBF.

Is the sketch right ?

Have you got some tipps for task 2 please ?

This is 0xBF
https://www.pic-upload.de/view-35464998/Bildschirmfoto2018-06-11um16.53.11.png.html

and this is 0xAA( I wrote wrong in picture )

https://www.pic-upload.de/view-35465003/Bildschirmfoto2018-06-11um18.21.00.png.html

Is the Can message painted right ?

[Lex33]

I have also painted the Can Signal for 0xB5

Is it right ?
https://www.pic-upload.de/view-35465924/Bildschirmfoto2018-06-11um20.57.46.png.html