1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203
|
// vt100.h
/*
----------------------------------------------
Terminal macros to use in C++ console programs
----------------------------------------------
Use the following macros in your C++ cout statements to manipulate the
video display. Most systems emulate either VT100 terminals or the ANSI
terminal protocol. If yours does not, these won't work until you find
an ANSI terminal driver.
The following macros are practically guaranteed to work:
clear_screen
audible_bell
goto_xy()
move_to()
default_attributes
set_reverse()
set_colors()
finalize
The least likely to work are
show_cursor()
set_italic()
.............................................................................
Example usage:
cout << clear_screen
<< goto_xy( 10, 2 )
<< "Hello";
To terminate your program, your code should look like this:
cout << finalize;
return EXIT_SUCCESS;
.............................................................................
T H E M A C R O S
cout << reset Restores the terminal to it's original
state.
You probably don't want to use this.
cout << clear_screen Clear the entire screen.
<< clear_to_bos Clear from the top of the screen.
<< clear_to_eos Clear to the bottom of the screen.
cout << clear_to_eol Clear to the end of the line.
<< clear_to_bol Clear to the beginning of the line.
<< clear_line Clear the entire line.
cout << visual_bell Blinks the screen (unreliable).
<< audible_bell Sounds the speaker beep.
cout << show_cursor( TRUE ) Make the cursor visible (default)
<< show_cursor( FALSE ) Make the cursor invisible
cout << goto_xy( x, y ) Move the cursor to coordinate (x, y),
or (column x, line y), where (1, 1)
is the upper-left corner of the screen.
<< move_to( line, column ) Same.
cout << cursor_up( count ) Move the cursor "count" characters
<< cursor_down( count ) (or lines) from its current position.
<< cursor_left( count )
<< cursor_right( count )
cout << set_scrolling_region( top, bottom )
Set the lines in the range [top,bottom]
to be those that scroll.
<< scroll_up( count ) Scroll the region up or down "count"
<< scroll_down( count ) lines.
cout << insert_line( count ) Insert or delete "count" items.
<< delete_line( count ) Always inserts blanks.
<< insert_char( count ) The result is affected if you change
<< delete_char( count ) the scroll region.
cout << default_attributes Reset so that the cursor attributes are
the default (no bold, underline, etc.
and colors are VT_DEFAULT).
<< set_bold( bool ) Bold text.
<< set_italic( bool ) Italic text.
<< set_underline( bool ) Underline text.
<< set_reverse( bool ) Reverse or invert the text colors.
<< set_attributes( bold, italic, underline, reverse )
Set all four text attributes at once
without affecting the color attributes.
<< set_colors( fg, bg ) The colors are
VT_BLACK VT_YELLOW VT_CYAN
VT_RED VT_BLUE VT_WHITE
VT_GREEN VT_MAGENTA VT_DEFAULT
cout << finalize Do this before your program ends.
(Alias for default_attributes.)
.............................................................................
Lastly
All this does is drive some basic functionality of a VT100/ANSI terminal.
Notibly, it lacks:
* The ability to tell you where the cursor is (so you must remember!)
* The ability to tell you the size of the terminal screen.
(You can use "stty size" at the command prompt to find out.)
* The ability to get just one character from the keyboard.
This takes some jumping through a few hoops. If you want to do some more
advanced stuff than what is presented here, consider using the ncurses
library (type "man ncurses" at the prompt).
(Here at RU, you'll have to include </usr/local/include/ncurses.h>
instead of just plain old <ncurses.h> to make curses work. Don't forget
to compile with "g++ ... -lncurses"!)
If you're interested in this kind of junk, type "man screen" at the prompt.
Enjoy!
--Michael Thomas Greer
*/
#ifndef VT100_MACRO_H
#define VT100_MACRO_H
#ifndef TRUE
#define TRUE (1)
#endif
#ifndef FALSE
#define FALSE (0)
#endif
#define VT_BLACK 0
#define VT_RED 1
#define VT_GREEN 2
#define VT_YELLOW 3
#define VT_BLUE 4
#define VT_MAGENTA 5
#define VT_CYAN 6
#define VT_WHITE 7
#define VT_DEFAULT 9
#define reset "\33c"
#define clear_screen "\33[2J"
#define clear_to_bos "\33[1J"
#define clear_to_eos "\33[J"
#define clear_line "\33[2K"
#define clear_to_bol "\33[1K"
#define clear_to_eol "\33[K"
#define visual_bell "\33g"
#define audible_bell "\a"
#define show_cursor( v ) ((v) ? "\33\67p" : "\33\66p")
#define goto_xy( x, y ) "\33[" << y << ";" << x << "H"
#define move_to( y, x ) "\33[" << y << ";" << x << "f"
#define cursor_up( count ) "\33[" << count << "A"
#define cursor_down( count ) "\33[" << count << "B"
#define cursor_right( count ) "\33[" << count << "C"
#define cursor_left( count ) "\33[" << count << "D"
#define set_scrolling_region( top, bottom ) "\33[" << top << ";" << bottom << "r"
#define scroll_up( count ) "\33[" << count << "S"
#define scroll_down( count ) "\33[" << count << "T"
#define insert_line( count ) "\33[" << count << "L"
#define delete_line( count ) "\33[" << count << "M"
#define insert_char( count ) "\33[" << count << "@"
#define delete_char( count ) "\33[" << count << "P"
static bool is_b = FALSE;
static bool is_i = FALSE;
static bool is_u = FALSE;
static bool is_r = FALSE;
static int fg_c = VT_DEFAULT;
static int bg_c = VT_DEFAULT;
#define default_attributes "\33[0m"
// these four following are not meant to be used externally
#define set_b( b ) ((is_b = b) ? "\33[1m" : "")
#define set_i( i ) ((is_i = i) ? "\33[3m" : "")
#define set_u( u ) ((is_u = u) ? "\33[4m" : "")
#define set_r( r ) ((is_r = r) ? "\33[7m" : "")
#define set_colors( fg, bg ) "\33[3" << (fg_c = fg) << ";4" << (bg_c = bg) << "m"
#define set_attributes( b, i, u, r ) set_b( b ) << set_i( i ) << set_u( u ) << set_r( r ) << set_colors( fg_c, bg_c )
#define set_bold( b ) default_attributes << set_attributes( b, is_i, is_u, is_r )
#define set_italic( i ) default_attributes << set_attributes( is_b, i, is_u, is_r )
#define set_underline( u ) default_attributes << set_attributes( is_b, is_i, u, is_r )
#define set_reverse( r ) default_attributes << set_attributes( is_b, is_i, is_u, r )
#define finalize default_attributes
#endif
// end vt100.h
| |